Fitting out, 2026

 

Daisy IV hibernating!

It has been a busy Spring.  Daisy IV had been rather neglected at the start of last season due to us moving to the coast, and having so many other things to do.  I never really caught up with the various things that needed doing.  So, late in February this year, I brought her, from her winter hibernation at the boatyard, back to the house to do a number of much needed pre-season jobs.

One was to replace, once again, the auto bilge pump.  The bilge pump is an absolute necessity since, unlike previous boats, the boats design means that the bulk of any rainwater, when n her mooring, generally doesn’t drain out through the scuppers, but rather gathers in the bilge.   The one I purchased last year, a Whale Supersub, was frankly next to useless.  The auto function never really worked properly and either didn't come on when required or, when it did work, forgot how to suck out the bilge water and, having sparked into life, refused to turn off...  So, this season, I purchased a new manual Rule pump and linked it up to a 'Waterwitch' float switch, and this finally seems to have worked well.

Waterwitch float switch

 Time will, of course, bear true testimony to this claim…  

Meanwhile, I am trying to regenerate a cover which came with the boat and might potentially be useful in diverting rain away from the bilges.  More on that in due course…

Whilst working on the bilge pump, I took the opportunity to overhaul the modest electrical wiring in the boat, building and installing a wooden mounted box housing the fuse box, so that all the wiring is now hopefully kept better organised and safe from any accidental problems - such as aforementioned water gathering in the bilge!

I also spent some time working on the centreplate downhaul which, when removing the cover for inspection, turned out to be showing alarming signs of wear.  This will be covered in a separate post since the saga continued post-launch.

The next thing was to fill an alarming number of deck holes which had been deliberately, one might say recklessly created by the previous owner, with his various mad projects.  So, making use of a fibreglass repair kit, these were made good albeit that I have erred on the side of functionality rather than cosmetic finishing - the looks of it all can wait for another day - but I couldn't wait until the start of the new season.

The final thing was to fit a brand new sprayhood and tent.  Unfortunately this hasn't been quite so successful as hoped since the tent Anglia Yacht Brokerage had ordered for me was incorrectly fitted, and so has had to go back for some important changes.  I remain ever hopeful that this will return in time to get some serious usage later in the summer.

And then there was the usual wood treatment, cleaning and polishing, prior to the first launch date which is due to take place on 20th March, well within my notional target to be afloat before All Fools Day.

Launch day!

Deep down in the darkest recesses…

 Deep down in the darkest recesses of any boat lies a place that few dare to venture.  It's an unforgiving space, full of rancid smells, foul gunge and, all too often associated with things which, at best, haven’t been operating as should well be the case.  Anyone who finds themselves here is visiting the boat's bilges. 

I had reason to poke around here over the past few days since the bilge pump, which is necessary for pumping out water that habitually accumulates here, wasn’t working properly.  If there is a weakness in the Deben Lugger design it is the fact that much of the rainwater doesn’t run off through the scuppers, and finds its way into the bilge.  A decent rainstorm, whilst on the mooring, will lead to a significant accumulation of water which, if left unchecked, could eventually lead to the hull being submerged.

Following this week's storms, Daisy IV found herself  many litres of water in the bilges, and reaching over the floorboards.  A subsequent inspection of the hull revealed a Rule bilge pump connected to a Rule-a-matic float valve.  Previously this has only been used in its 'manual' mode of operation, since the thing wouldn’t switch off once the hull was emptied, as it is intended to do.

The problem seems to be with the float valve which was incorrectly installed at a level which was little higher than the bilge pump, so that the water level could never quite reach the depth required for the float valve to sit sufficiently low to switch off the electricity supply.

Eventually I managed to remove the float valve, and have now added a centimetre of supporting wood so that it sits high enough to operate as intended.  So, we shall await with interest the outcomes of the next deluge…

Following this piece of maintenance, it seemed the only sensible thing to go for a little sail.  The tide was in its early ebb, so it was good to beat upstream against a F3 NWW breeze, before a run downstream as the wind increased to F4.

9.4nm